Environment-Friendly Aluminum Processless Non-Chemistry Thermal CTP Plate

• Customization: Available
• Material: Aluminum
• Usage: Offset Printing
• Model NO.: ECOO-G
• Style: Negative
• Gauge: 0.15mm,0.20mm,0.30mm
• Sensitivity: 130-150 Mj/ Sqm
• Screem Method: 1-99% @200 Lpi Am or 20μm FM or Mixture
• Start-up Paper: <20 Sheets
• Emusion: Double Coating
• Run Length: 100,000 Impressions
• Transport Package: Standard Carton Package
• Specification: Not wider than 1350mm in width
• Trademark: EcooGraphix
• Origin: China
• HS Code: 3701302400
• Production Capacity: 500, 000sqm Per Year

Product Description

 

Processless Thermal CTP Plate, double coating,negative working, DOP plate 

Why is processless plate? 

ECOO-G thermal plate (develop on press) environmental-friendly processless printing plate.
It's chemistry free, environment-friendly, as same as Sonora XP and Agfa Azura!
-Run on press machine directly after CTP exposing, no need chemistry processing  
-Saves cost of labor, water treatment and developer tank
-shorten the prepress procedure

Product Description

 

1. INTRODUCTION OF ECOO-G

-Run length: 100,000 impressions
-Suitable for sheet-fed offset press or high speed rotary offset press
-Suitable for different types of traditional inks and fountain solutions, including alcohol's substitutes as fountain solutions
-Unsuitable to improve run length by baking plates

2. CHCARACTERISTIC OF ECOO-G
 

-Negative non-ablation photosensitive system

-Compatible with the dominant devices in the market
-Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter

-Good dot reproduction, stable performance, wide processing latitude

-Long stability of latent image, can be stored at least a week after plate-making

-High quality aluminum substrate, professional coating formulation

 

3. RECOMMENDES APPLICATION TO PRESS PROCEDURES OF ECOO-G

 

1. Clean all the inks on the blanket;
2. Start the press machine, apply the water roller, run 30-40 seconds;

3. Apply the ink rollers 20-30 seconds;

4. Apply the paper and start print.

 

Remark: If operate step 2 and 3 longer, paper will be wasted less.

 

 

 

 

Specification

 

Plate Technical Specification
Model	ECOO-G
Plate Type	Non-ablation thermal-negative type
Application	High grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm / 0.30mm
Spectrum scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy imaging	130-150 mj/ m²
The period of latent image stabilization	≤7 days
Recommended screen method	1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up	<50 sheets
Safety light	4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing	Without processing, directly on press
Run Length	100,000 impressions, actual run length depends on printing conditions
Baking	No recommended
Maximum short grain width	Maximum width 1280 mm
Photosensitive wave length	830 nm
Coating color	Grey
Shelf life	12 months under recommended condition
Transportation	Packed in seal and stored by means of prevention
	from light, moisture, overheat and high humidity
Storage	Recommended condition: 18ºC-24ºC, 40%-50% RH.

 

Comparing With The Plate Of Kodak Sonora XP

Features	ECOO-G	Kodak Sonora XP
Sensitive wavelength(nm)	800-850	800-850
Coating color	Light green	Light green
Sensitivity (mj/cm2 )	150	150
Exposure in safe light	White light 1 hour; yellow light 24 hours	White light 1 hour; yellow light 24 hours
After image contrast	Can be spotted by eyes, but auto punching machine cannot recognize it	Can be spotted by eyes, but auto punching machine cannot recognize it
Imaging device	Normal thermal CTP device 1-99% @ 200lpi	Normal thermal CTP device 1-99% @ 200lpi
Resolution	1-99% @ 200lpi (dependent on CTP capability)	1-99% @ 200lpi (dependent on CTP capability)
Run-length	100,000	100,000
Storage	12 month (under recommend environment)	12 month (under recommend environment)

Applied parameters In Imaging Device

Data	Kodak trendsetters	LOTTEM 400(TH1.7)	MAGNUS 400	Screen 8600S
Laser power	15- 17W	300-320mw	19.5-21.5W	80-90 %
Drum speed	250-300rpm	850-900rpm	400-450rpm	800-900rpm
Resolution	Customized	Customized	Customized	Customized
Parameter that	Focus/	Focus/	Focus/	Focus/
need set up	Zoom	Zoom	Zoom	Zoom

Factory

1. Material Warehouse:
Only use South Western Aluminum, Best quality aluminum roll manufacturer.
This ensure the plate substrate quality.

 

 

 

 

2. Worldwide Top Standard Production Line:240meters long, 40meters per minute

 

 

 

3. Three steps of quality control systems: constant online digital inspection system, constant online worker selective examination, 100% manual inspection
 

 

 

Workflow

 

 

RFQ

 

Q1: How can I get the sample? 
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.

Q3: How long can the sample be ready?
A: It usually takes about 7-10 days to prepare the sample.

Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.

Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM

Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's bra