Processless Chemistry Free Thermal CTP Plate

• Customization: Available
• Material: Aluminum
• Usage: Offset Printing, Digital Printing
• Model NO.: Ecoo-G
• Type: CTP Plate
• Style: Negative
• Run Length: 500, 00 Without Baking
• Exposure Energy: 130-150mj/Square Centimeter(830nm)
• Coating Color: Gray
• Plate Thickness: 0.30/0.15mm
• Plate Size: 1030*800/510*400
• Packing: 50/100PCS Per Box
• Transport Package: Standard Export Packing
• Specification: 745x605x0.30(mm)
• Trademark: Ecoo-G
• Origin: China
• HS Code: 370130
• Production Capacity: 100, 000sqm

Product Description

Ecoo Non-Processing Negative working CTP Plate for Offset Printing
Direct on Press CTP Plate 
Environmental-friendly and Cost-effective

ECOO-G Thermal DOP plate (Development On Press, Processless)

   ECOO-G  thermal CTP plate is a new environmental-friendly processless printing plate.   ECOO-G plate can run on press machine directly after CTP exposing, no need chemistry processing. It is double layer plate: emulsion layer is on the aluminum, and protection layer is above emulsion layer. 
  The emulsion layer is negative photopolymerization /cross-link, can be exposed by 800-850nm wave-length. So all the known thermal CTPs (can expose normal thermal plate) on the market can expose this plate, only set up the exposure parameter to "negative". 
    The protection layer is water-soluble polymer. It is mainly used to protect the emulsion layer high sensitivity (low exposure energy required), and from damaging as well. Therefore, it is important to keep the plate away from any water, steam or even sweat materials.
   ECOO-G plate will be affected by high temperature and high humidity. Recommended shipment and storage condition is 18-25 ^OC, RH 30-50%.

 

Plate Technical Specification
Model	ECOO-G
Plate Type	Non-ablation thermal-negative type
Application	High grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm / 0.30mm
Spectrum  scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy imaging	130~150mJ/m²
The period of latent image stabilization	≤7days
Recommended  screen method	1~99 @200Lpi AM/20u FM and mixture
The paper number of start-up	<50 sheets
Safety Light	1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light
Processing	Without processing,directly on press
Run Length	100,000 impressions,actual run length depends on printing conditions
Baking	No reccomanded
Characteristics
Negative non-ablation photosensitive system
Compatible with the dominant devices in the market
Can be printed directly on the machine without any processing steps after scanning by themal CTP platesetter
Good dot reproduction,stable performance,wide processing latitude
Long stability of latent image,can be stored at least a week after plate-making
High quality aluminum substrate,professional coating formulation
Application
Suitable for sheet-fed offset press or high speed rotary offset press
Run length:100,000 impressions
Suitable for different types of traditional inks and fountain solutions,including alcohol's substitutes as fountain solutions
Unsuitable to improve run length by baking plates
Transportation and Storage
Packed in seal and stored by means of preventing from light/moisture,over heat and high humidity.
Recommended conditions:18ºC~24ºC,40%~50% RH.

 



 

 Our Factory: