Processless Development on Press Aluminum Thermal CTP Plate for Offset Printing

• Material: Aluminum
• Usage: Offset Printing
• Type: CTP Plate
• Style: Negative
• Spectral Sensitivity: 800-850nm
• Run Length: 100, 000 Impressions
• Model NO.: ECOO-G
• Gauges: 0.15mm, 0.3mm
• Shelf Life: 12 Months
• Coating Color: Light Gray
• Safe Light: Dark Room Yellow Light
• Low-Energy Imaging: Maximum Width 1280 mm
• Processing: Without Processing, Directly on Press
• Transport Package: Standard Exporting Wooden Pallet
• Specification: Not wider than 1350mm in width
• Trademark: EcooGraphix
• Origin: China
• HS Code: 3701302400
• Production Capacity: 1000, 000sqm

Product Description

 

Product Description

Printing Plate Chemistry Free DOP Thermal Offset CTP Plate ECOO-G
 

1.Application

EcooGraphix Ecoo-G is a new, environmentally friendly, development on press CTP plate. It can be run directly on a printing press after imaging, without a need for chemical processing.

2.Characteristic

ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.

 

3. ECOO-G Technical Features

-Sensitive wavelength (nm): 800-850nm
-Coating color: Light gray
-Sensitivity(my/cm2): 150my/cm2
-Exposure in safe light: White light 1 hour; yellow light 24 hours
-After image contrast: Can be spotted by eyes, but auto punching machine cannot recognize it
-Imaging device: Normal thermal CTP device
-Resolution: 1-99% @ 200lpi (dependent on CTP capability)
-Run-length: 100,000 impressions
-Storage: 12 month (under  recommend environment)

 

 

 

Specification

 

Plate Technical Specification
Model	ECOO-G
Plate Type	Non-ablation thermal-negative type
Application	High grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm / 0.30mm
Spectrum scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy imaging	130-150 mj/ m²
The period of latent image stabilization	≤7 days
Recommended screen method	1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up	<50 sheets
Safety light	4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing	Without processing, directly on press
Run Length	100,000 impressions, actual run length depends on printing conditions
Baking	No recommended
Maximum short grain width	Maximum width 1280 mm
Photosensitive wave length	830 nm
Coating color	Grey
Shelf life	12 months under recommended condition
Transportation	Packed in seal and stored by means of prevention
	from light, moisture, overheat and high humidity
Storage	Recommended condition: 18ºC-24ºC, 40%-50% RH.

 

Parameters in Imaging device

 

Data	Kodak trendsetters	LOTTEM 400(TH1.7)	MAGNUS 400	Screen 8600S
Laser power	15- 17W	300-320mw	19.5-21.5W	80-90 %
Drum speed	250-300rpm	850-900rpm	400-450rpm	800-900rpm
Resolution	Customized	Customized	Customized	Customized
Parameter that	Focus/	Focus/	Focus/	Focus/
need set up	Zoom	Zoom	Zoom	Zoom

 

Customer's Feedback

 

 

Producing and Packing

More details

 

 

FAQ

Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.

Q3: How long can the sample be ready?
 A: It usually takes about 3days to prepare the sample.

Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.

Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM

Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.