EcooGraphix Flexo CTP FL600E for Label and Trademark Printing
EcooSetter Flexo FL-600E CTP
Laser Channel: 32-channel
Output Speed: 2.5sqm/h
Max. Breadth: 26" x 17"/ 680mm x 430mm
Plate Thickness: 0.7mm - 1.7mm
Laser Power: High power semiconductor laser diode
Plate Type: Digital relief flexo plate (water-wash), Digital flexo plate (water-wash), Digital flexo plate (Solvent-wash) Steel based digital plates (water/ alcohol washable) are applied for EM/ SM series
Application: Label and trademark
Resolutions: 4000dpi
Plate Loading: Manual load and unload
Interface: USB2.0
Focus adjust: Dynamic auto-focus
Device Size: 1087x770x1000mm (WxDxH)
Net Weight: 400Kg
Power: 220V/50Hz, 60Hz, mainframe 1.5KW + Vacuum 1.1KW
Environment: Recommended temperature: 18-30ºC Humidity: 10-80%
| EcooSetter Flexo CTP Series Technical Specifications |
| Model |
EcooSetter |
EcooSetter |
EcooSetter |
EcooSetter |
EcooSetter |
EcooSetter |
| FL-600E |
FL-600S |
FL-800E |
FL-800S |
FL- 1500E |
FL-1500S |
| Laser Channel |
16CH |
32CH |
16CH |
32CH |
32CH |
64CH |
| Output Speed |
1.25 m2/h |
2.5 m2/h |
1.25 m2 /h |
2.5 m2 /h |
4.3m2 /h |
8.5 m2/h |
| Max.Breadth |
26'' x 17''/
680mm x430mm |
25"x30"/635mmx762mm |
47"×60"/1200mm×1524mm |
| Min. Breadth |
100mmx100mm |
| Plate Type |
Digital relief flexo plate(water-wash) ,digital flexo plate(solvent-wash),steel based digital plate(water/alcohol washable) are applied for EM/SM series |
| Plate Thickness |
0.7mm - 1.7mm |
0.7mm-2.84mm |
0.9mm-3.94mm |
| Application |
Label and trademark |
Paper box and soft packaging |
| Resolutions |
4000dpi , optional:3000dpi or 2400dpi |
| Plate Loading |
Manual load and unload |
| Interface |
USB2.0 |
| Focus Adjust |
Dynamic autofocus |
| Laser Lifetime |
>10000h |
Device Size
(WxDxH)mm |
1087x770x1000 |
1,630×1,170×965 |
2,315×1,370×1,052 |
| Net Weight |
400KG |
800KG |
1200KG |
| Power |
Single phase: 220V/50HZ, 60HZ/3KW |
Single phase: 200V/50HZ, 60HZ/4.5KW |
| Environment |
Recommended temperature: 18-30ºC Hu m i dity: 10%- 80% |
Flexo Relief Plate Making Processing:
1.Computer to Flexo Plate:
Before plate making, the computer system is used to control the image output device to output the image laser engraved on the CTP resin relief plate;
2. Plate Exposing,Washing and Drying by the flexo plate processor :
The CTP resin relief plate is placed in the middle position, the exposure time is set, and the resin at the exposure position is hardened by UV light, then the upper cover 1 is opened, water is poured into the water tank 4 to 2mm above the brush tip, and the water on the green patch is absorbed with absorbent cotton, and the back of the exposed CTP resin relief plate is attached to the green patch with double-sided tape, so that the plate is facing downward, and the plate is washed in the water tank 4 of the plate washing device.
After washing, the water on the plate is absorbed with an absorbent sponge, and then the plate is removed from the green patch. The water used for washing the plate is filtered by the water filter device, and sprayed out by the water sprayer 11 above the water filter device after heating.
After washing the plate, it is placed in the drying device for drying, and finally placed in the drawer of the post-exposure device 6 for exposure to make a printing plate.
Our Factory:
Certificates:
FAQ:
1. What are your main products ?
Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP , CTCP , VLF CTP and CTCP, Flexo CTP , Processor , Offset Plates ,inks , blankets , postpress Packing equipments and so on.
There many of our CTPs installed worldwide. Our partners in USA,Canada,Mexico,Colombia,Turkey,Hungary,South Africa and so on are very pleased with our Technician Support service and product performance.
We also have five offset plates production lines producing the thermal CTP plate(single and double layers),positive CTCP plates(single and double layers) and Chemistry free CTP plate.
You can get the prepress equipments and consumables all in one and no worry about the after-sales service from our company.
2. Where is your factory ?
Our CTP machine factory is located in Hangzhou city , which is about 1.5 hour by train from Shanghai.
You are warmly welcomed to visit our factory!
3. What is your warranty for the CTPs ?
Three years' Laser Head and main spare parts for the CTPs, One year for the Processor.
4. What is the Lead Time?
Usually 10-30 days, and we will try our best to meet your demands.
5. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose V9.
6. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions,we will be at your disposal 7x24 hours.
Audited Supplier 
){kind=link}