| Customization: | Available |
|---|---|
| Material: | Aluminum |
| Usage: | Offset Printing, Digital Printing |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | ECOO-G |
| Plate Type | Non-ablation thermal-negative type |
| Application | High grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm / 0.30mm |
| Spectrum scope | 800-850nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 130-150 mj/ m² |
| The period of latent image stabilization | ≤7 days |
| Recommended screen method | 1-99% @200 LPI AM or 20μm FM or mixture |
| The paper number of start-up | <50 sheets |
| Safety light | 4 hours under yellow light; |
| 1 hour under fluorescent lamp; | |
| Direct exposure under natural light is safe but not recommended. | |
| Processing | Without processing, directly on press |
| Run Length | 100,000 impressions, actual run length depends on printing conditions |
| Baking | No recommended |
| Maximum short grain width | Maximum width 1280 mm |
| Photosensitive wave length | 830 nm |
| Coating color | Grey |
| Shelf life | 12 months under recommended condition |
| Transportation | Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity |
| Storage | Recommended condition: 18ºC-24ºC, 40%-50% RH. |
3. Processless plate V.S normal process plate
| ECOO-G | V.S | ECOO-ED |
| (Thermal negative processless plate ) | (Thermal positive process plate) | |
| No processor requires, save your cost on processor machine | A processor machine required | |
| No chemistry to deal with, save your cost on developer and water treatment | Developer required | |
| Elimination of processing time, more time available for other work | 30 seconds in processor per sheet | |
| Same performance level as Azura & Sonora, but more competitive price | / | |
| Environment-friendly product, has bright future, policy support | Need extra water treatment device and space to treat wasted developer |
|
| Higher price than normal process plate | More economic in price, lower business cost | |
| 20 pcs of starting papers until image come out | less waste in starting paper | |
| Not strong contrast between imaging zone and non-image zone, not easily to recognize image mistake before printing | Strong contrast after imaging is helpful to observe image mistake |
4. ECOO-G contrast before and after imaging
| Data | Kodak trendsetters |
LOTTEM 400(TH1.7) |
MAGNUS 400 |
Screen 8600S |
| Laser power | 15- 17W | 300-320mw | 19.5-21.5W | 80-90 % |
| Drum speed | 250-300rpm | 850-900rpm | 400-450rpm | 800-900rpm |
| Resolution | Customized | Customized | Customized | Customized |
| Parameter that | Focus/ | Focus/ | Focus/ | Focus/ |
| need set up | Zoom | Zoom | Zoom | Zoom |
1. How long is the lead time?
The lead time is normally 45 days.
2. Do you offer free plate samples?
Yes, we offer free testing samples maximum 12 pcs for each size but with delivery fee to collect.
3. How do you guarantee stable quality?
There are 3 inpecting procedures: 1, automatic on-line 24h scanning detector; 2, random sampling per 15 mins at the producing line; 3, manually full inspection before packing. The production is mature. It is not a new product to us.
4. Do you have accompanying plate making products to enable one-stand easy purchase for some end users?
Yes. CTP machine, processors, violet plate, CTP-CTCP plate, chemistry(fountain solution, roller wash, etc.) are all available to make your purchase more easily.
5. Payment term?
Normally, 30% deposit, 70% before shipping, or LC at sight.
6. Is refrigerating container necessary for shipment?
No. The plate is relatively stable and mature. So normal container is enough unless some ertreme hot situations.
7. How to use this processless plate?
1. Clean all the inks on the blanket.
2. Start the press machine, apply the water roller, run 15-20seconds.
3.Apply the ink rollers 20-30 seconds.
4.Apply the paper and start print.
){kind=link}