Thermal Process-Free (Non-Process) CTP Offset Negative Plate

• Customization: Available
• Material: Aluminum
• Usage: Offset Printing
• Model NO.: ECOO-G
• Type: CTP Plate
• Style: Negative
• Run Length: 100, 000 Impressions
• Thickness: 0.15 mm or 0.30 mm
• Sensitivity(Mj/Sqm Centimeter): 130 - 150
• Plate Type: Thermal-Negative Type
• Safelight(No Direct Irradiation): Fluorescent Lamp1 Hour; Yellow Light 4 Hours
• Processing: Without Processing, Directly on Press
• The Paper Number of Start-up: < 50 Sheets
• Spectrum Scope: 800-850 Nm
• Transport Package: Standard Cartons for Sea/Air Shipping
• Specification: Spectral Sensitivity: 800-850 nm
• Trademark: EcooGraphix
• Origin: China
• HS Code: 370130
• Production Capacity: 2, 000, 000 Sqm Per Year

Product Description

Thermal Process-free Negative Environmentally Friendly ECOO-G CTP Offset Plate




 

Model: ECOO-G

1. Application

EcooGraphix ECOO-G is a new, environmentally friendly, Development On Press CTP plate. It can be run directly on a printing press after imaging, without chemical processing.





2. Characteristic

ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.  




        
3. Structure

 ECOO-G has 2 layers: emulsion layer and protection layer. 
 

The emulsion layer contains cross-link and will be exposed by 800-850nm wave-length light. Almost all thermal CTPs on the market can image the plate. There is water-soluble polymer on the protection layer. This layer is mainly used to protect the emulsion layer from damage. 





4. Techinical Data
 

Model	ECOO-G
Plate Type	Non-ablation thermal-negative type
Application	High grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm/ 0.30mm
Spectrum Scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy Imaging	130~150mj/cm²
The Period Of Latent Image Stabilization	≤ 7days
Recommended Screen Method	1~99 @200Lpi AM/20u FM and mixture
The paper number of start-up	< 50 sheets
Safety Light	1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light
Processing	Without processing, directly on press
Run Length	100,000 impressions, actual run length depends on printing conditions
Baking	No recommended
Characteristics
Negative non-ablation photosensitive system
Compatible with the dominant devices in the market
Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter
Good dot reproduction, stable performance, wide processing latitude
Long stability of latent image, can be stored at least a week after plate-making
High quality aluminum substrate, professional coating formulation
Application
Suitable for sheet-fed offset press or high speed rotary offset press
Run length: 100,000 impressions
Suitable for different types of traditional inks and fountain solutions, including alcohol's substitutes as fountain solutions
Unsuitable to improve run length by baking plates
Transportation and Storage
Packed in seal and stored by means of preventing from light/moisture, over heat and high humidity.
Recommended conditions: 18ºC~24ºC, 40%~50% RH.

 

 5. Factory, Producing Line And Warehouse













6. Certificate







7. FAQ


Q1: Can I get the sample ?
A: We are very glad to provide some sample for you to test. We usually provide 5-15 pieces plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.



Q2: What is the cost for the CTP plate sample freight ?
A: The air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.



Q3: How long can the sample be ready ?
 A: It usually takes about 3 days to prepare the sample.



Q4: Can I visit your factory ?
A: You are warmly welcome to visit our factory! Our company is in Hangzhou city, which is about 1.5 hours by train from Shanghai.



Q5: How many square meters CTP plates can feed one 20' container ?
A: About 20,000-25,000sqm.