Ecoographix Negative DOP Processless Thermal CTP Plate for Offset Printing

• Customization: Available
• Material: Aluminum
• Usage: Offset Printing
• Model NO.: ECOO-G
• Type: CTP Plate
• Style: Negative
• Gauges: 0.3mm
• Shelf Life: 12 Months
• Running Length: 100, 000 Impressions
• Safe Light: Dark Room Yellow Light
• Coating Color: Light Gray
• Exposure Energy: 160-180mj/Square Centimeter(830nm)
• Transport Package: Standard Exporting Wooden Pallet
• Specification: 745x605x0.30(mm)
• Trademark: EcooGraphix
• Origin: China
• HS Code: 3701302400
• Production Capacity: 1000, 000sqm

Product Description

Product Description

EcooGraphix Negative DOP Processless Thermal CTP Plate

1.Application

EcooGraphix Ecoo-G is a new, environmentally friendly, development On Press CTP plate.
It can be run directly on a printing press after imaging, without a need for chemical processing.

2.Characteristic
 

ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.

3. Recommended application to press procedures of ECOO-G:
 

1. Clean all the inks on the blanket;

2. Start the press machine, apply the water roller, run 30-40 seconds;

3. Apply the ink rollers 20-30 seconds;

4. Apply the paper and start print.
 

Remark: If operate step 2 and 3 longer, paper will be wasted less

   

Specification

 
 

Plate Technical Specification
Model	ECOO-G
Plate Type	Non-ablation thermal-negative type
Application	High grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm / 0.30mm
Spectrum scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy imaging	130-150 mj/ m²
The period of latent image stabilization	≤7 days
Recommended screen method	1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up	<50 sheets
Safety light	4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing	Without processing, directly on press
Run Length	100,000 impressions, actual run length depends on printing conditions
Baking	No recommended
Maximum short grain width	Maximum width 1280 mm
Photosensitive wave length	830 nm
Coating color	Grey
Shelf life	12 months under recommended condition
Transportation	Packed in seal and stored by means of prevention
	from light, moisture, overheat and high humidity
Storage	Recommended condition: 18ºC-24ºC, 40%-50% RH.

PROCESSLESS PLATE V.S. PROCESS PLATE
 

ECOO-G	VS	ECOO-ED
(Thermal Negative Processless plate )		(Thermal positive process plate)
No processor requires, save your cost on processor machine		A processor machine required
No chemistry to deal with, save your cost on developer and water treatment		Developer required
Elimination of processing time, more time available for other work		30 seconds in processor per sheet
Same performance level as Azura & Sonora, but more competitive price		/
Environment-friendly product, has bright future, policy support		Need extra water treatment device and space to treat wasted developer
Higher price than normal process plate		More economic in price, lower business cost
20 pcs of starting papers until image come out		less waste in starting paper
Not strong contrast between imaging zone and non-image zone, not easily to recognize image mistake before printing		Strong contrast after imaging is helpful to observe image mistake

 

Workflow

 

Producing and Packing

The Packing Of Our Plate

Our Factory

1. Material Warehouse:
Only use South Western Aluminum, Best quality aluminum roll manufacturer.
This ensure the plate substrate quality.

2. Worldwide Top Standard Production Line: 240meters long, 40meters per minute
 

3. Three Steps QC Control

 

More details

FAQ

 

Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.

Q3: How long can the sample be ready?
 A: It usually takes about 3days to prepare the sample.

Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.

Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM

Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.