Long Run Length Violet Photopolymer Aluminum Offset Printing CTP Plate

• Material: Aluminum
• Usage: Offset Printing
• Type: CTP Plate
• Style: Negative
• Application: Newspaper/Commercial Printing
• Features: Negative-Working, Low-Chemical Violet Plate
• Model NO.: ECOO-V
• Substrat: Electrochemically Grained and Anodized Aluminum Su
• Laser Energy: 70-80 μj/Cm²
• Run Length: More Than 150, 000 Impressions
• Gauges: 0.20, 0.30mm
• Shelf Life: 12months Under Recommended Storage Conditions
• Transport Package: Standard Exporting Wooden Pallet
• Specification: Maximum width 1320 mm
• Trademark: EcooGraphix
• Origin: China
• HS Code: 370130
• Production Capacity: 2000, 000sqm/Year

Product Description

EcooGraphix Negative Photopolymer Violet CTP Plate

Introduction

Ecoo-V is an environmental friendly Low Chemical Violet Photopolymer CTP plate for Newspaper printing.
It is a kind of plate specialized for violet CTP platesetters for high-level printing, which can be scanned by 410nm laser controlled by computer, and mounted on the press for printing after preheating, rinsing, developing, etc.

Features

1. Simplifying the processing, only 3 steps including preheating, developing, and drying.
2. Redusing chemical consuption, saving water.
3. Weak alkali developer maximumly avoid developing inconsistency due to exhausted developer. It makes print wuality more stable.

 

Specification

 

Plate Type	ECOO-V
Features	Negative-working, low-chemical violet plate, also can work as normal violet plate
Application	Newspaper/Commercial Printing
Substrate	Electrochemically grained and anodized aluminum substrate
Gauge	0.20/0.25/0.30mm
Plate-setter	Existing mainstream 405nm violet plate-setter, All the main brands in market, like Agfa/FFEI&FUJI/ Krause/ECRM/Highwater/Escher-Grad/Dotline
Processor	Existing conventional violet processors and low-chemical violet processors. Recommended: Glunz&Jensen Raptor, Height inca/maya etc.
Developer	FUJI LP. DWS. Agfa PL. 10. IMAF NEGA 910; PVD gum
Processing	Preheat temp setting 90- 100C (plate surface temp) For FUJI LP-DWS: Developer temperature 25-26C/Dwell time 16-17 seconds For Agfa PL- 10 Developer temperature 24C/Dwell time 17 seconds
Run Length	More than 150,000 impressions. Actual run length may vary according to press/paper/ink conditions
Laser energy	70-80 μj/cm²
Resolution	3% to 97% @ 175 lpi under calibration
Safe light	For manual handling and platesetting loading, darkroom conditions with G10 safelight is required.
Shelf life	12months under recommended storage conditions
Storage	Temperature: 18-26C Relative humidity: 30-70% RH
Advantages	Environment-friendly------help enterprises to develop Stable developing performance, compatible with various kinds of developers Reduce equipment investment and maintenance cost

Model
ECOO-V

Plate Type
Low chemistry violet plate, negative printing

Application
Newspaper Printing

Substrate
Electro Chemically Grained and Anodized Aluminum

Gauge
0.20, 0.25, 0.30, 0.40(mm)

Maximum short grain width
Maximum width 1320 mm

Developer
Developing gum

Length of Run
Unbaked: 200,000 impressions;
Baked: 500,000 impressions(dependent upon image resolution, press, press chemical, ink and paper conditions)

Plate setters Capability
All the main brands violet CTP in market, laser power no less than 30 mw

Aluminum
Standard 1050 Alloy

Exposure energy
50-60 μj/ cm²(based on plate setter and developing condition)

Developing time
20±3 sec

Developing Temperature
28±2ºC

Spectral Sensitivity
405 nm  

Resolution
150lpi (2-98%), under 1800dpi, 25μm line can be produced.

Preheat  
95-121ºC

Brush Speed
100 rpm

Shelf life
12 months under recommended storage conditions

Storage and handling
Store plates flat in their packaging, away from excessive cold, heat or high humidity.
Recommended condition is temperature 15-28ºC and RH between 30-70%;
Handle with care, the maximum height is 1.2m'
Open the box under yellow light. Sealed the box with remained plate to avoid moisture.

 

Product Description

 

Aluminum Substrate

-The plate is applied with many latest technologies, like excellent roughed aluminum substrate, high-resolution formulation design and advanced Multi-layer Coating Technology.

-These advanced technologies ensure the high quality and stable property.

-Compared with normal Violet CTP plate, Ecoo-V keeps original photosensitive features and printing compatibility

Characteristic and Plate Making

1. Simplifying the processing, only 3 steps including preheating, developing, and drying.

2. Reducing chemical consumption, saving water.

3. Weak alkali developer maximumly avoid developing inconsistency due to exhausted developer. It makes print quality more stable

      

Packaging & Shipping

 

Producing ==> Cutting & Paper lining==> Sampling and Inspection==> Package and warehousing
 

Standard Exporting Wooden Pallet

Our Factory
 

Workflow

 

 

More details

Our Certificate
 

 

 

Customers Around The World

FAQ

 

Q1:Can I get the sample? 
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.

Q3: How long can the sample be ready?
 A: It usually takes about 3days to prepare the sample.

Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.

Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM

Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.