Customization: | Available |
---|---|
Material: | Polyester |
Usage: | Offset Printing |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | ECOO-TDS | |
Plate Type | Alliance far red film | |
Spectral Sensitivity | HeNe laser and red laser diode(630-670nm) | |
Description | Emulsion coated on a 0.10 mm antistatic polyester base | |
Practical Photographic Properities With Different Engine | ||
Engine | Accuset | Avantra |
Int. Setting | 170 | 230 |
Practical Density | D.4.00-4.20 | D.4.10-4.30 |
5% | 5% | 5% |
50% | 57% | 53% |
95% | 98% | 96% |
Developer | Agfa developers | |
Processing Time | 20-40 sec | |
Processing Temperature | 35ºC or 95ºF | |
Developer Replenishment (eg, ACD/ASD) |
15% exposure | 50 ml/m² |
50% exposure | 150 ml/m² | |
85% exposure | 250 ml/m² | |
Anti-OX Replenishment | 1000 ml/24h= 0.264 US gallons/24h | |
Fixer | Agfa fixer | |
Fixing Temperature | 32ºC or 90ºF | |
Fixer Replenishment (Without Fixer Electrolysis) |
15% exposure | 500 ml/m² |
50% exposure | 300 ml/m² | |
85% exposure | 100 ml/m² | |
Fixer Replenishment With Fixer Electrolysis | 125 ml/m² | |
Practical set-up Density | D.4.00-D.4.20(dot gain depending on optical quality of imagesetter) | |
Chemical Compatibility | Processable in all rapid access chemistries and in main hard dot chemistries such as RA2000, Fuji HQ QRD-1 AND QRD-1P | |
Dimensional Stability | Humidity coef: 0.10mm base, Crh 0.016 mm/m/%RH Temp. coef: 0.10mm base, Cot 0.018 mm/m/1ºC |
|
Safe Light | Dark Green, recommended: encapsulite T20/ND.75 or equivalent | |
Storage | The films are preferably stored in a cool dry place temperature below 20ºC and a relative humidity between 30%-60% |