Without Processing Offset Printing Plate Chemistry Free CTP Plate

• Material: Aluminum
• Usage: Offset Printing
• Type: CTP Plate
• Style: Negative
• Coating Color: Grey
• Low-Energy Imaging: 130-150 Mj/ Square Centimeter
• Model NO.: ECOO-G
• Run Length: 100000 Impressions;Actual Run Length on Conditions
• Recommended Screen Method: 1-99% @200lpi Am or 20um FM or Mixture
• Plate Type: Thermal-Negative Type
• Spectral Sensitivity: 800-850nm - Peaks 830nm
• Thickness: 0.15mm / 0.30mm
• Processing: Without Processing, Directly on Press
• Transport Package: Standard Exporting Wooden Pallet
• Specification: Maximum short grain width 1280mm
• Trademark: EcooGraphix
• Origin: China
• HS Code: 370130
• Production Capacity: 1, 000, 000 Sqm Per Year

Product Description

Without Processing Offset Printing Plate Chemistry Free CTP Plate

 

Model: ECOO-G



 

Application

 

EcooGraphix ECOO-G is a new, environmentally friendly, Development On Press CTP plate. It can be run directly on a printing press after imaging, without a need for chemical processing.

 

Specification

 

Model	ECOO-G
Plate type	Thermal-negative type
Application	High grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm/ 0.30mm
Maximum short grain width	Maximum width 1280 mm
Spectrum scope	800-850 nm
Photosensitive wave length	830 nm
Platesetter	Various dominant thermal platesetters in the market
Coating color	Grey
Low-energy imaging	130-150 mj/cm²
The period of latent image stabilization	≤ 7 days
Recommended screen method	1-99% @200LPI AM or 20μm FM or mixture
The paper number of start-up	< 50 sheets
Safety light	4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing	Without processing, directly on press
Run length	100,000 impressions; Actual run length depends on printing conditions
Shelf life	12 months under recommended condition
Transportation	Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity
Storage	Recommended condition: 18ºC-24ºC, 40%-50% RH.

Model
ECOO-G

Plate type
Thermal-negative type

Application
High grade commercial and newspaper printing

Substrate
Electrolyte graining and Anodized AL substrate

Thickness
0.15mm/ 0.30mm

Maximum short grain width
Maximum width 1280 mm

Spectrum scope
800-850 nm

Photosensitive wave length
830 nm

Platesetter
Various dominant thermal platesetters in the market

Coating color
Grey

Low-energy imaging
130-150 mj/cm²

The period of latent image stabilization
≤ 7 days

Recommended screen method
1-99% @200 LPI AM or 20μm FM or mixture

The paper number of start-up
< 50 sheets

Safety light
4 hours under yellow light; 1 hour under fluorescent lamp;
Direct exposure under natural light is safe but not recommended.

Processing
Without processing, directly on press

Run length
100,000 impressions; Actual run length depends on printing conditions

Shelf life
12 months under recommended condition

Transportation
Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity

Storage
Recommended condition: 18ºC-24ºC, 40%-50% RH.


Applied parameters in Imaging device
 

CTP model Data	Kodak trendsetters	LOTTEM 400(TH1.7)	MAGNUS 400	Screen 8600S
Laser power	15-17W	300-320mw	19.5-21.5W	80-90W
Drum speed	250-300rpm	850-900rpm	400-450rpm	800-900rpm
Resolution	Customized	Customized	Customized	Customized
Parameter that need set up	Focus/ Zoom	Focus/ Zoom	Focus/ Zoom	Focus/ Zoom

*Note: Higher exposure energy will make the image contrast more clear, and benefit to the plate run length; while over high/low exposure energy will affect the image quality negatively.

ECOO-G Processless CTP plate Video: https://youtu.be/LLqNaY1ivcI


 

Characteristics

ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.

 

Customer's Feedback

 

 

Producing and Packing

From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers. 

Certificates

 

 

FAQ

 

Q1: Can I get the sample ?

A: We are very glad to provide some sample for you to test. We usually provide 5-15 pieces plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.



Q2: What is the cost for the CTP plate sample freight ?

A: The air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the pick-up service from your local agent.



Q3: How long can the sample be ready ?

 A: It usually takes about 3 days to prepare the sample.



Q4: Can I visit your factory ?

A: You are warmly welcome to visit our factory! Our company is in Hangzhou city, which is about 1.5 hours by train from Shanghai.



Q5: How many square meters CTP plates can feed one 20' container ?

A: About 20000-25000sqm.



Q6: Can I take my own brand and label on the packing ?

A: Yes, we can provide the OEM with the customer's brand and label.