EcooGraphix Negative DOP Processless Non Chemical Thermal CTP Plate
for offset printing
1.Application
EcooGraphix Ecoo-G is a new, environmentally friendly,Development On Press CTP plate . It can be run directly on a printing press after imaging,without a need for chemical processing.
2.Characteristic
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
| Plate Technical Specification |
| |
|
| Model |
ECOO-G |
| Plate Type |
Non-ablation thermal-negative type |
| Application |
High grade commercial and newspaper printing |
| |
|
| Substrate |
Electrolyte graining and Anodized AL substrate |
| Thickness |
0.15mm / 0.30mm |
| |
|
| Spectrum scope |
800-850nm |
| Platesetter |
Various dominant thermal platesetters in the market |
| Low-energy imaging |
130~150mJ/m² |
| The period of latent image stabilization |
≤7days |
Recommended
screen method |
1~99 @200Lpi AM/20u FM and mixture |
| The paper number of start-up |
<50 sheets |
| Safety Light |
1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light |
| Processing |
Without processing,directly on press |
| Run Length |
100,000 impressions,actual run length depends on printing conditions |
| Baking |
No recommended |
| Characteristics |
|
| |
|
| Negative non-ablation photosensitive system |
|
| Compatible with the dominant devices in the market |
| Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter |
| |
|
| Good dot reproduction,stable performance,wide processing latitude |
| Long stability of latent image,can be stored at least a week after plate-making |
| |
|
| High quality aluminum substrate,professional coating formulation |
| Application |
|
| Suitable for sheet-fed offset press or high speed rotary offset press |
|
| |
|
| Run length:100,000 impressions |
| Suitable for different types of traditional inks and fountain solutions,including alcohol's substitutes as fountain solutions |
| |
|
| Unsuitable to improve run length by baking plates |
| Transportation and Storage |
|
| Packed in seal and stored by means of preventing from light/moisture,over heat and high humidity. |
| |
|
| Recommended conditions:18ºC~24ºC,40%~50% RH. |
ECOO-G thermal plate is a new environmental-friendly processless printing plate.
ECOO-G plate can be run on press machine directly after CTP exposing, no need chemistry processing. It is double layer plate: emulsion layer is on the aluminum, and protection layer is above emulsion layer.
The emulsion layer is negative photopolymerization /cross-link, can be exposed by 800-850nm wave-length. So all the known thermal CTPs (can expose normal thermal plate) on the market can expose this plate, only set up the exposure parameter to "negative".
The protection layer is water-soluble polymer. It is mainly used to protect the emulsion layer high sensitivity (low exposure energy required), and from damaging as well. Therefore, it is important to keep the plate away from any water, steam or even sweat materials.
ECOO-G plate will be affected by high temperature and high humidity. Recommended shipment and storage condition is 18-25 OC, RH 30-50%.
Our Factory:
FAQ
Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.
Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM
More Information, Please CONTACT:
Audited Supplier 
){kind=link}
){kind=link}