Newspaper Printing Plate Low Chemistry Violet Offset Printing Aluminum Plate

• Customization: Available
• Material: Aluminum
• Usage: Offset Printing
• Model NO.: ECOO-V
• Type: CTP Plate
• Style: Negative
• Exposure Energy: 50-60uj/Squre Centimeters
• Length of Run (Impressions): Unbaked: 200,000; Baked: 500,000.
• Resolution: 150lpi(2-98%), Under 1,800dpi, 25um Line
• Plate Type: Low Chemistry Violet Plate, Negative Printing
• Substrate: Electro Chemically Grained and Anodized Aluminum
• Maximum Short Grain Width: Maximum Width 1,320 mm
• Spectral Sensitivity: 405 Nm
• Brush Speed: 100 Rpm
• Transport Package: Standard Exporting Wooden Pallet
• Specification: Gauge(mm) 0.20, 0.25, 0.30, 0.40
• Trademark: EcooGraphix
• Origin: China
• HS Code: 3701302400
• Production Capacity: 800, 000sqm

Product Description

Newspaper Printing Plate Low Chemistry Violet Offset Printing Aluminum Plate 






Model: ECOO-V




 

 

Introduction

EcooGraphix Low-chemical Violet CTP Plate ECOO-V can be used for newspaper printing. It is an environmental friendly product. Compared with normal Violet CTP plate, ECOO-V keeps original photosensitive features and printing compatibility.




 

Specification

 




 

Model	ECOO-V
Plate Type	Low chemistry violet plate, negative printing
Application	Newspaper Printing
Substrate	Electro Chemically Grained and Anodized Aluminum
Gauge	0.20, 0.25, 0.30, 0.40 mm
Maximum Short Grain Width	Maximum width 1,320 mm
Developer	Developing gum
Length Of Run	Unbaked: 200,000 impressions; Baked: 500,000 impressions(dependent upon image resolution, press, press chemical, ink and paper conditions)
Plate Setters Capability	All the main brands violet CTP in market, laser power no less than 30 mw
Aluminum	Standard 1,050 Alloy
Exposure Energy	50-60 μj/cm²(based on plate setter and developing condition)
Developing Time	20 ±3 sec
Developing Temperature	28 ±2 ºC
Spectral Sensitivity	405 nm
Resolution	150lpi(2-98%), under 1,800dpi, 25μm line can be produced.
Preheat	95 - 121 ºC
Brush Speed	100 rpm
Shelf Life	12 months under recommended storage conditions
Storage And Handling	Store plates flat in their packaging, away from excessive cold, heat or high humidity. Recommended condition is: temperature 15 - 28ºC and RH between 30 - 70%; Handle with care, the maximum height is 1.2m'. Open the box under yellow light. Sealed the box with remained plate to avoid moisture.

Model
ECOO-V

Plate Type
Low chemistry violet plate, negative printing
 
Application 
Newspaper Printing

Substrate
Electro Chemically Grained and Anodized Aluminum
 
Gauge
0.20, 0.25, 0.30, 0.40 mm
 
Maximum Short Grain Width
Maximum width 1,320 mm
 
Developer
Developing gum

Length Of Run
Unbaked: 200,000 impressions;
Baked: 500,000 impressions(dependent upon image resolution, press,
press chemical, ink and paper conditions)

Plate Setters Capability
All the main brands violet CTP in market, laser power no less than 30 mw

Aluminum 
Standard 1,050 Alloy

Exposure Energy 
50-60 μj/cm²(based on plate setter and developing condition)

Developing Time 
20 ±3 sec

Developing Temperature 
28 ±2 ºC

Spectral Sensitivity 
405 nm  

Resolution  
150lpi(2 - 98%), under 1,800dpi, 25μm line can be produced. 

Preheat 
95 - 121 ºC

Brush Speed 
100 rpm

Shelf Life 
12 months under recommended storage conditions

Storage And Handling
Store plates flat in their packaging, away from excessive cold, heat or high humidity.
Recommended condition is: temperature 15 - 28ºC and RH between 30 - 70%;
Handle with care, the maximum height is 1.2m'.
Open the box under yellow light. Sealed the box with remained plate to avoid moisture.

 

Features

♠  Eco-Friendly:
applied with low PH finisher during washout treatment, reducing chemical consumption and liquid waste.
 

♥  Stable Developing Performance:
compatible with most brands of violet plate developer and less sensitive to PH value of finisher.
 

♣  Lower Investment and Maintenance Cost:
can work with simplied processor, which removes prewash, post-rinse and gumming steps from conventional processor.
 

♦  Higher Run Length:
outside protective layer protects sensitive layer from damage, making more impressions per plate.
 

 

Producing and Packing

From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.










 

Certifications

 

FAQ

 

Q1: Can I get the sample ?
A: We are very glad to provide some sample for you to test. We usually provide 5-15 pieces plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
 

Q2: What is the cost for the CTP plate sample freight ?
A: The air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the pick-up service from your local agent.
 

Q3: How long can the sample be ready ?
A: It usually takes about 3 days to prepare the sample.
 

Q4: Can I visit your factory ?
A: You are warmly welcome to visit our factory! Our company is in Hangzhou city, which is about 1.5 hours by train from Shanghai.
 

Q5: How many square meters CTP plates can feed one 20' container ?
A: About 20,000-25,000sqm.
 

Q6: Can I take my own brand and label on the packing ?
A: Yes, we can provide the OEM with the customer's brand and label.