Ecoographix CTP Plate Processor Developing Machine

• Customization: Available
• After-sales Service: Installation, Training, Trouble-Shooting
• Warranty: 1 Year
• Model NO.: Ecoo Processor
• Usage: Loading Machine for CTP
• Plate: Processing Machine
• Type: Processor
• Material / Metal Processed: Stainless Steel
• Classification: Processor
• Light Source: Non
• Certification: CE, SGS
• Weight: 420 Kgs
• Power Supply: 5 Kw
• Transport Package: Standard Exporting Package: Polywood Carton
• Specification: 1420mm*1460mm*1280mm
• Trademark: Ecoographix
• Origin: China
• HS Code: 8442302900
• Production Capacity: 600 PCS Per Year

Product Description

Ecoo processor with 4 different width for specific plate size

Brief introduction

Processor machine is used to wash off the unimaged area after plate being exposed on CTP machine. So it is a supporting deveice to work with CTP machine for form a complete prepress production line. 

It can work with online CTP machine connected by a bridge to from an automatic line. It can work independently with manual feeding processor. 

The processor will brush off the umimaged emusion coating in the developer tank and wash the plate in water tank, and coat with protection gum and then go to drying section. All these steps happen in the processor. 

Technical Configurations
 

Model	Ecoo P-900	Ecoo P-1150	Ecoo P-1250	Ecoo P-1700
Plate size(max)	Max width: 900 mm	Max width: 1150 mm	Max width: 1250 mm	Max width: 1700 mm
Plate size(min)	Min width: 280 mm	Min width: 280 mm	Min width: 280 mm	Min width: 280 mm
Plate thickness	0.15-0.4mm
Processing power	Speed adjustable (10 to 60 seconds) 400-1000 mm/minutes
Temperature	10 to 45 ºC can be adjusted (automatic temperature control, cooling system)
Developing capacity	46 L	58 L	70 L	78 L
Drying temperature	25-65 ºC can be adjusted
Electricity requirement	220 V(208V-240V) single phase 50 or 60 hz
Working power	4.5 kw	5 kw	5.5 kw	6 kw
Weight	355 kg	420 kg	512 kg	600 kg

Complete prepress production as below

Autoloader+Online CTP machine+bridge+processor+stacker 



Delivery & Package

Any kinds of transpotation is workable for us. The nearest departure port is Shanghai port or Ningbo Port.

The equipment is packed in standard wood carton for exporting use with enough protective layers.

Inside view of the machine 

Q&A

1. What about the Installation and after-sales technician support?
The processor is a simple and very easy machine. Normally we offer free remote guide of installation and operation. 
Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions,we will be at your disposal 7x24 hours.

2. Can we process a thermal plate and CTCP plate with the same machine?
The CTP plate and CTCP plate are developed under the same procedure. So the machine can handle both. But the developer chemistry in the tank are different. Thermal developer (DV-T) works on thermal plate. CTCP developer(DV-UV) works on CTCP plate.

3. what chemicals are using during the processing? Is there a water recycle in the model?
Plate developer, gum solution. Yes, there is a water recycle in the machine to save water. 

4. Could this processor model work well with our online CTP machines? 
We will require more information to confirm if it  is available with you machine, The important factor is the height of your CTP mahcine's discharge slot above the ground. It works well with the most CTP machine brands.