Chemical Free Offset Printing Aluminum Thermal CTP Plate Without Processing

• Material: Aluminum
• Usage: Offset Printing, Digital Printing
• Type: CTP Plate
• Style: Negative
• Plate Type: Non-Ablation Thermal-Negative Type
• Thickness: 0.15mm / 0.30mm
• Model NO.: ECOO-G
• Spectrum Scope: 800-850nm
• Low-Energy Imaging: 130~150mj/Cm²
• Factory Location: Hangzhou, China
• Transport Package: Standard Exporting Wooden Box
• Specification: Maximum Width 1280 mm
• Trademark: EcooGraphix
• Origin: China
• HS Code: 370130
• Production Capacity: 2000, 000 Sqm Per Year

Product Description

 

Model: ECOO-G
 

ECOO-G thermal plate (developed on press) environmental-friendly processless printing plate.
-Run on press machine directly after CTP exposing, no need for chemistry processing 
-Saves the cost of labor, water treatment, and developer tank

Our ECOO-G Plate is the same as Sonora XP and Agfa Azura!

 

 

Product Description

1. INTRODUCTION OF ECOO-G

-Run length: 100,000 impressions
-Suitable for sheet-fed offset press or high-speed rotary offset press
-Suitable for different types of traditional inks and fountain solutions, including alcohol substitutes as fountain solutions
-Unsuitable to improve run length by baking plates

 

 

2. CHARACTERISTICS OF ECOO-G
 

-Negative non-ablation photosensitive system

-Compatible with the dominant devices in the market
-Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter

-Good dot reproduction, stable performance, wide processing latitude

-Long stability of the latent image, which can be stored at least a week after plate-making

-High-quality aluminum substrate, professional coating formulation

 

 

 

 

3. RECOMMENDED APPLICATION TO PRESS PROCEDURES OF ECOO-G

 

1. Clean all the inks on the blanket;
2. Start the press machine, apply the water roller, run 30-40 seconds;

3. Apply the ink rollers 20-30 seconds;

4. Apply the paper and start print.

Remark: If steps 2 and 3 are extended, the paper will be wasted less.

 

 

Specification

 

Plate Technical Specification
Model	ECOO-G
Plate Type	Non-ablation thermal-negative type
Application	High-grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm / 0.30mm
Spectrum scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy imaging	130-150 mj/ m²
The period of latent image stabilization	≤7 days
Recommended screen method	1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up	<50 sheets
Safety light	4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing	Without processing, directly on the press
Run Length	100,000 impressions, actual run length depends on printing conditions
Baking	No recommended
Maximum short grain width	Maximum width 1280 mm
Photosensitive wavelength	830 nm
Coating color	Grey
Shelf life	12 months under recommended condition
Transportation	Packed in seal and stored by means of prevention
	from light, moisture, overheating, and high humidity
Storage	Recommended condition: 18ºC-24ºC, 40%-50% RH.

 

Comparing With The Plate Of Kodak Sonora XP

Features	ECOO-G	Kodak Sonora XP
Sensitive wavelength(nm)	800-850	800-850
Coating color	Light green	Light green
Sensitivity (mj/cm2 )	150	150
Exposure in safe light	White light 1 hour; yellow light 24 hours	White light 1 hour; yellow light 24 hours
After image contrast	Can be spotted by eyes, but auto punching machine cannot recognize it	Can be spotted by eyes, but auto punching machine cannot recognize it
Imaging device	Normal thermal CTP device 1-99% @ 200lpi	Normal thermal CTP device 1-99% @ 200lpi
Resolution	1-99% @ 200lpi (dependent on CTP capability)	1-99% @ 200lpi (dependent on CTP capability)
Run-length	100,000	100,000
Storage	12 months (under recommended environment)	12 months (under recommended environment)

Applied Parameters in Imaging Device

Data	Kodak trendsetters	LOTTE 400(TH1.7)	MAGNUS 400	Screen 8600S
Laser power	15- 17W	300-320mw	19.5-21.5W	80-90 %
Drum speed	250-300rpm	850-900rpm	400-450rpm	800-900rpm
Resolution	Customized	Customized	Customized	Customized
Parameter that	Focus/	Focus/	Focus/	Focus/
need set up	Zoom	Zoom	Zoom	Zoom

 

 

Producing and Packing

Material Warehouse:
Only use South Western Aluminum, the Best quality aluminum roll manufacturer.
This ensures the plate substrate quality.

 

 

 

Worldwide Top Standard Production Line:
240meters long, 40meters per minute

 

 

 

Three Steps QC Control

 

 

 

 

Workflow

 

 

 

More details

 

 

 

 

 

 

 

FAQ

Q1: Can I get the sample? 
A: We are very glad to provide some samples for you to test. We usually provide 5-15 pieces of plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.

Q3: How long can the sample be ready?
A: It usually takes about 3 days to prepare the sample.

Q4: Can I visit your factory?
A: You are warmly welcome to visit our factory! Our company is in Hangzhou city, which is about 1.5 hour by train from Shanghai.

Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM

Q6: Can I take my own brand and label on the packing?

A: Yes, we can provide the OEM with the customer's brand and label.