Agfa Hns HS Graphi Arts Imagesetting Film for Offset Printing

• Customization: Available
• Material: Aluminum
• Usage: Offset Printing
• Model NO.: ECOO-TDS
• Type: Film Products
• Style: Positive
• Plate Type: Alliance Far Red Film
• Spectral Sensitivity: Hene Laser and Red Laser Diode (630-670nm)
• Description: Emulsion Coated on a 0.10 mm Antistatic Polyester
• Developer: Agfa Developers
• Processing Time: 20-40 Sec
• Safe Light: Dark Green, Recommended: Encapsulite T20/ND.75
• Transport Package: Carton
• Specification: 60m/roll
• Trademark: EcooGraphix
• Origin: China
• HS Code: 3701302400
• Production Capacity: 200, 000 Square Meter/Year

Product Description

Agfa Graphic Art Imagesetter Film For Offset Printing
Model: ECOO-TDS



Brief introduction:
Recording film were the standard in the printing business for years. Your company still has the option to continue using them. We offer Agfa original film produced in Belgium and recutted and repackaged in Shanghai Agfa branch. 
It is featureing with open-system, high-speed, red-sensitive film with hard dot image quality, intended for exposure in image setters with HeNe laser (630nm-670nm) or red laser diode. Perfect processing in compatible chemistries.


Specification:

Model	ECOO-TDS
Plate Type	Alliance far red film
Spectral Sensitivity	HeNe laser and red laser diode (630-670nm)
Description	Emulsion coated on a 0.10 mm antistatic polyester base
Practical Photographic Properities with different engine
Engine	Accuset	Avantra
Int. Setting	170	230
Practical Density	D.4.00-4.20	D.4.10-4.30
5%	5%	5%
50%	57%	53%
95%	98%	96%
Developer	Agfa developers
Processing time	20-40 sec
Processing temperature	35ºC or 95ºF
Developer Replenishment	15% exposure	50ml/m²
(eg, ACD/ASD)	50% exposure	150ml/m²
	85% exposure	250ml/m²
Anti-OX replenishment	1000 ml/24h=0.264 US gallons/24h
Fixer	Agfa fixer
Fixing temperature	32ºC or 90ºF
Fixer replenishment (Without Fixer electrolysis)	15% exposure	500 ml/m²
	50% exposure	300ml/m²
	85% exposure	100ml/m²
Fixer replenishment with Fixer electrolysis	125 ml/m²
Practical set-up density	D 4.00-D.4.20 (dot gain depending on optical quality of imagesetter)
Chemical Compatibility	Processable in all rapid access chemistries and in main hard dot chemistries such as RA2000, Fuji HQ QRD-1 AND QRD-1P
Dimensional Stability	Humidity coef: 0.10mm base, Crh 0.016mm/m/%RH
	Temp. coef: 0.10mm base, Cot 0.018mm/m/1ºC
Safe light	Dark Green, recommended: Encapsulite T20/ND.75 or equivalent
Storage	The films are preferably stored in a cool dry place temperature below 20ºC  and a relative humidity between 30% and 60%

Features:
Excellent image quality : very good sharpness and high practical density 
Very wide System latitude: Wide processing & exposure latitude 
Very good Day to day consistency Very good batch-to-batch consistency 
Convenience and ease of use because of available ECO equipment 
Ecological & Economical replenishment, very Low chemistry consumption. 
Linear output for conventional screening  Approved for stochastic screening 
Anti-static before and after processing 
Open system : perfect processing in compatible chemistries



Sizes:
390mmX60m 610mmX60m
406mmX60m 660mmX60m
457mmX60m 813mmX60m
508mmX60m 838mmX60m
558mmX60m 914mmX60m
Other sizes are also available as required.




Unpacking:
The film for daylight loading can be loaded in the special cassette of laser image output machine under daylight.
The film for darkroom loading should be loaded in the special cassette of laser image output machine under special dark green light or under totally dark.
Be careful when operating in order to prevent film damaged from friction, folding, oil and fingerprint.


Storage:
Store the films in a cool and dry place. Storage temperature is not higher than 20°C and RH no more than 65%. Being too warm and humid will shorten the films shelf life. Avoid radiation or corrosion of other substances and sunshine.