Development on Press Thermal Processless Plate Negative CTP Plate

• Customization: Available
• Material: Aluminum
• Usage: Offset Printing
• Model NO.: ECOO-G
• Type: CTP Plate
• Style: Negative
• Plate Type: Offset Printing Plate
• Low-Energy Imaging: 130-150 Mj/Square Centimeter
• Run Length: 100, 000 Impressions
• Thickness: 0.15mm / 0.30mm
• Maximum Short Grain Width: Maximum Width 1280 mm
• Shelf Life: 12 Months Under Recommended Condition
• Processing: Without Processing, Directly on Press
• Platesetter: Various Dominant Thermal Platesetters in Market
• Coating Color: Grey
• Transport Package: Standard Exporting Wooden Pallet
• Specification: Spectrum scope 800-850 nm
• Trademark: EcooGraphix
• Origin: China
• HS Code: 3701302400
• Production Capacity: 500, 000sqm

Product Description

Development on Press Thermal Processless Plate Negative CTP Plate

 

 Model: ECOO-G

 
 

Application

EcooGraphix ECOO-G is a new, environmentally friendly, Development On Press CTP plate. It can be run directly on a printing press after imaging, without a need for chemical processing.



Recommended application to press procedures of ECOO-G:
1. Clean all the inks on the blanket;
2. Start the press machine, apply the water roller, run 30-40 seconds;
3. Apply the ink rollers 20-30 seconds;
4. Apply the paper and start print.
 
Remark: If operate step 2 and 3 longer, paper will be wasted less.




 

Specification

 

 

 

Model	ECOO-G
Plate Type	Thermal-negative type
Application	High grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm/ 0.30mm
Maximum short grain width	Maximum width 1,280 mm
Spectrum scope	800-850 nm
Photosensitive wave length	830 nm
Platesetter	Various dominant thermal platesetters in the market
Coating color	Grey
Low-energy imaging	130-150 mj/cm²
The period of latent image stabilization	≤ 7 days
Recommended screen method	1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up	< 50 sheets
Safety light	4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing	Without processing, directly on press
Run Length	100,000 impressions; Actual run length depends on printing conditions
Shelf life	12 months under recommended condition
Transportation	Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity
Storage	Recommended condition: 18ºC-24ºC, 40%-50% RH.

 

Model         ECOO-G
Plate Type         Thermal-negative type
Application         High grade commercial and newspaper printing
Substrate         Electrolyte graining and Anodized AL substrate
Thickness         0.15mm/ 0.30mm
Maximum short grain width        Maximum width 1,280 mm
Spectrum scope        800-850 nm
Photosensitive wave length        830 nm
Platesetter        Various dominant thermal platesetters in the market
Coating color        Grey
Low-energy imaging        130-150 mj/cm²
The period of latent image stabilization      ≤ 7 days
Recommended screen method       1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up        < 50 sheets
Safety light        4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing        Without processing, directly on press
Run Length        100,000 impressions; Actual run length depends on printing conditions
Shelf life        12 months under recommended condition
Transportation         Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity
Storage         Recommended condition: 18ºC-24ºC, 40%-50% RH.

 

Applied parameters in imaging device
 

CTP model Data	Kodak trendsetters	LOTTEM 400(TH1.7)	MAGNUS 400	Screen 8600S
Laser power	15-17W	300-320mw	19.5-21.5W	80-90W
Drum speed	250-300rpm	850-900rpm	400-450rpm	800-900rpm
Resolution	Customized	Customized	Customized	Customized
Parameter that need set up	Focus/ Zoom	Focus/ Zoom	Focus/ Zoom	Focus/ Zoom

*Note: Higher exposure energy will make the image contrast more clear, and benefit to the plate run length;
while over high/low exposure energy will affect the image quality negatively.

ECOO-G Processless CTP Plate Video: https://youtu.be/LLqNaY1ivcI





 

Characteristics

 

ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution;
while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.





 

Customer's Feedback

 

Producing and Packing

 

From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers. 

 

 

Certificates

 

 

FAQ

 

Q1: Can I get the sample ?
A: We are very glad to provide some sample for you to test. We usually provide 5-15 pieces plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.



Q2: What is the cost for the CTP plate sample freight ?
A: The air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the pick-up service from your local agent.



Q3: How long can the sample be ready ?
 A: It usually takes about 3 days to prepare the sample.



Q4: Can I visit your factory ?
A: You are warmly welcome to visit our factory! Our company is in Hangzhou city, which is about 1.5 hours by train from Shanghai.



Q5: How many square meters CTP plates can feed one 20' container ?
A: About 20,000-25,000sqm.



Q6: Can I take my own brand and label on the packing ?
A: Yes, we can provide the OEM with the customer's brand and label.