Ecoographix Chemical Free Processless Thermal Aluminun CTP Printing Plate

• Material: Aluminum
• Usage: Offset Printing
• Type: CTP Plate
• Style: Negative
• Application: High Grade Commercial and Newspaper Printing
• Substrate: Electrolyte Graining and Anodized Al Substrate
• Model NO.: ECOO-G
• Thickness: 0.15mm, 0.3mm
• Resolution: 1-99% @ 200lpi (Dependent on CTP Capability)
• Spectrum Scope: 800-850nm
• Low-Energy Imaging: 130~150mj/Cm²
• Run Length: 100, 000 Impressions
• Processing: Without Processing,Directly on Press
• Transport Package: Standard Exporting Wooden Box
• Specification: 1030x790x0.30(mm)
• Trademark: EcooGraphix
• Origin: China
• HS Code: 370130
• Production Capacity: 2000, 000sqm/Year

Product Description

Ecoographix Chemical Free Processless Thermal Aluminun CTP Printing Plate

 

 ECOO-G can be run on press machine directly after CTP exposing, no need chemistry processing, as same sa Sonora XP.

 

Product Description

 

1. Introduction Of ECOO-G

 

ECOO-G is well sold in Europe, USA, Canada. It is like Kodak Sonora and Agfa Azura
 

It meets the trend of being environment-friendly and has bright future.
This plate can be applied on printing machine directly without processing and developing.
So it saves cost of labor, water treatment and developer tank. Hope you like it!

 

2. Characteristic Of ECOO-G
 

High-quality aluminum substrate and unique-grain processing technology.

The substrate grain is uniform fine, which ensures the exact dot reproduction and excellent printing adaptability of the printing plate.
The professional formula design with infrared laser sensitive phase-change layer ensures that the plate can be put on press directly after exposure.

 

3. Recommendes Application To Press Procedures Of ECOO-G 

 

-Clean all the inks on the blanket;

-Start the press machine, apply the water roller, run 30-40 seconds;

-Apply the ink rollers 20-30 seconds;

-Apply the paper and start print.

Remark: If operate step 2 and 3 longer, paper will be wasted less.

 

Specification

 

Plate Technical Specification
Model	ECOO-G
Plate Type	Non-ablation thermal-negative type
Application	High grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.30mm
Spectrum scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy imaging	130-150 mj/ m²
The period of latent image stabilization	≤7 days
Recommended screen method	1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up	<50 sheets
Safety light	4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing	Without processing, directly on press
Run Length	100,000 impressions, actual run length depends on printing conditions
Baking	No recommended
Maximum short grain width	Maximum width 1280 mm
Photosensitive wave length	830 nm
Coating color	Grey
Shelf life	12 months under recommended condition
Transportation	Packed in seal and stored by means of prevention
	from light, moisture, overheat and high humidity
Storage	Recommended condition: 18ºC-24ºC, 40%-50% RH.

Model
ECOO-G

Plate Type
Thermal-negative type

Application
High grade commercial and newspaper printing

Substrate
Electrolyte graining and Anodized AL substrate

Thickness
0.15mm / 0.30mm

Maximum short grain width
Maximum width 1280 mm

Spectrum scope
800-850 nm

Photosensitive wave length
830 nm

Platesetter
Various dominant thermal platesetters in the market

Coating color
Grey

Low-energy imaging
130-150 mj/ cm²

The period of latent image stabilization
≤ 7 days

Recommended screen method
1-99% @200 LPI AM or 20μm FM or mixture

The paper number of start-up
< 50 sheets

Safety light
4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.

Processing
Without processing, directly on press

Run Length
100,000 impressions; Actual run length depends on printing conditions

Shelf life
12 months under recommended condition

Transportation
Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity

Storage
Recommended condition: 18ºC-24ºC, 40%-50% RH.



Comparing With The Plate Of Kodak Sonora XP
 

Features	ECOO-G	Kodak Sonora XP
Sensitive wavelength(nm)	800-850	800-850
Coating color	Light green	Light green
Sensitivity (mj/cm2 )	150	150
Exposure in safe light	White light 1 hour; yellow light 24 hours	White light 1 hour; yellow light 24 hours
After image contrast	Can be spotted by eyes, but auto punching machine cannot recognize it	Can be spotted by eyes, but auto punching machine cannot recognize it
Imaging device	Normal thermal CTP device 1-99% @ 200lpi	Normal thermal CTP device 1-99% @ 200lpi
Resolution	1-99% @ 200lpi (dependent on CTP capability)	1-99% @ 200lpi (dependent on CTP capability)
Run-length	100,000	100,000
Storage	12 month (under recommend environment)	12 month (under recommend environment)

Applied parameters In Imaging Device
 

Data	Kodak trendsetters	LOTTEM 400(TH1.7)	MAGNUS 400	Screen 8600S
Laser power	15- 17W	300-320mw	19.5-21.5W	80-90 %
Drum speed	250-300rpm	850-900rpm	400-450rpm	800-900rpm
Resolution	Customized	Customized	Customized	Customized
Parameter that need set up	Focus/Zoom	Focus/Zoom	Focus/Zoom	Focus/Zoom

 

 

Producing and Packing

Packing Of The Plate




Our Factory

1. Material Warehouse:
Only use South Western Aluminum, Best quality aluminum roll manufacturer.
This ensure the plate substrate quality.

2. Worldwide Top Standard Production Line: 240meters long, 40meters per minute


3. Three Steps QC Control



 

Workflow

 

More details

Our Certificate

Our Customer All Around The World


 

FAQ

Q1: Can I get the sample? 
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.

Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.

Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.

Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM

Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.