| Customization: | Available |
|---|---|
| Material: | Aluminum |
| Usage: | Offset Printing, Digital Printing |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Plate Technical Specification | |
| Model | ECOO-G |
| Plate Type | Non-ablation thermal-negative type |
| Application | High grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm / 0.30mm |
| Spectrum scope | 800-850nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 130-150 mj/ m² |
| The period of latent image stabilization | ≤7 days |
| Recommended screen method | 1-99% @200 LPI AM or 20μm FM or mixture |
| The paper number of start-up | <50 sheets |
| Safety light | 4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended. |
| Processing | Without processing, directly on press |
| Run Length | 100,000 impressions, actual run length depends on printing conditions |
| Baking | No recommended |
| Maximum short grain width | Maximum width 1280 mm |
| Photosensitive wave length | 830 nm |
| Coating color | Grey |
| Shelf life | 12 months under recommended condition |
| Transportation | Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity |
| Storage | Recommended condition: 18ºC-24ºC, 40%-50% RH. |
| Features | ECOO-G | Kodak Sonora XP |
| Sensitive wavelength | 800-850nm | 800-850nm |
| Coating color | Light green | Light green |
| Sensitivity | 150mj/cm2 | 150mj/cm2 |
| Exposure in safe light | White light 1 hour; yellow light 24 hours |
White light 1 hour; yellow light 24 hours |
| After image contrast | Can be spotted by eyes, but auto punching machine cannot recognize it |
Can be spotted by eyes, but auto punching machine cannot recognize it |
| Imaging device | Normal thermal CTP device 1-99% @ 200lpi |
Normal thermal CTP device 1-99% @ 200lpi |
| Resolution | 1-99% @ 200lpi (dependent on CTP capability) |
1-99% @ 200lpi (dependent on CTP capability) |
| Run-length | 100,000 | 100,000 |
| Storage | 12 month (under recommend environment) | 12 month (under recommend environment) |
Application: Suitable for sheet-fed offset press or high speed rotary offset press
Characteristics: Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter
| ECOO-G | VS | ECOO-ED |
| (Thermal Negative Processless plate ) | (Thermal positive process plate) | |
| No processor requires, save your cost on processor machine | A processor machine required | |
| No chemistry to deal with, save your cost on developer and water treatment |
Developer required | |
| Elimination of processing time, more time available for other work | 30 seconds in processor per sheet | |
| Same performance level as Azura & Sonora, but more competitive price |
/ | |
| Environment-friendly product, has bright future, policy support |
Need extra water treatment device and space to treat wasted developer | |
| Higher price than normal process plate | More economic in price, lower business cost | |
| 20 pcs of starting papers until image come out | less waste in starting paper | |
| Not strong contrast between imaging zone and non-image zone, not easily to recognize image mistake before printing |
Strong contrast after imaging is helpful to observe image mistake |
Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.
Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM
Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.
){kind=link}